3M™ Advanced Comfort Reusable Respirator 7512P1-DC, OV/P95, Mdm, 1-Fcpc, 1-pr of 6001 Crtdgs, 2-prs 5P71 Fltrs, 1-pr 501 Rtnrs

I use this while working with plastic cement and it's been both comfortable and easy to adjust.Keep in mind that it comes with 2 filter types you install together: the organic vapor cartridge to block certain vapors and gases, and the P95 filter (thin white piece) which is held in place over the OV cartridge with a retaining cap. You will need to replace each filter separately, or order 3M's combination cartridges which include both types in one piece.To find out which type of cartridge you need, find the hazardous substances on the Material Safety Data Sheet of whatever chemicals you expect to work with, and match them to the Respirator Selection Guide on 3M's website.

I bought this when I was stripping old varnish in my house trim. IT worked great I did not smell anything. However I did get a little skin irritation on my upper nose and it felt a little tight.

I would have serious lung problems if it weren't for this mask ! and the 98% filters I got for it were awesome . I even use this thing for going into the porta-potty at work lol, if you ever worked at a construction site and had to use a porta potty then you know how bad it can be .. just slap this thing on and you can sit in there and hang out all day with no smell ! For non poop related things this mask also delivers exceptionally. Im a carpenter and i use it almost all day long , it's comfortable , effective and easy to adjust and remove in a hurry. There was a shipping mishap but it wasnt amazons fault or the sellers fault , it was my local post office . They delivered it to the wrong address. I called amazon to find out where my package was and they just overnighted me a whole new set ( mask , extra filters and safety glasses. all part of my original order) at no cost to me !. That is awesome costumer service!

Using this mask with P95 particulate filters and it works great! It's a night and day difference with the OV cartridges, especially in confined spaces such as my RV (painting my private domicile). I don't use the P100 as I want to keep the loading down and it's not necessary in my situation. The mask itself is quite comfortable; the only complaint is that the bridge of the nose comes close to my goggles. This will probably interfere with many fully sealing goggles.I love the variety of filters available for this mask. I will be buying separate N95 particulate filters so that I can use this really comfortable respirator when I work in minor dust/mold situations. P100/N100 are not required for less than 10 square feet as per the CDC. I see some reviewers speaking about the P100 filters, but there's no real use for P100/N100 on this respirator. It's better just to get full face protection when your goggles don't fit snugly (comfortably). Do you really want to work in an environment where you can't fully protect your moist eyes from mold spores and bits of poo? Don't take Half-measures. If I find myself in a tough mold situation I'll say no thanks and burn the place down instead.If you need a good everyman respirator - this is the one. If you have major mold issues to remediate, I suggest you go 'full measure' and consider your options (full-face mask, flame thrower, brother-in-law) before buying this respirator.The final thing is the mask does not seem to seal well around facial hair; a goatee would be OK at the largest. Note that the back strap is hard plastic. If you've undergone chemotherapy or have no hair, the upper strap may irritate your skin so wear a hat.

Its easy to use. its light. fits well. i dont know if the filtering mechanism is so great to be honest

worked really well for me. Fits well and reasonably comfortable. Used for brush on varnish

For over 20 years I used a respirator manufactured by 3M when I was handling grain. It was a sad day when this old reliable finally gave out on me. Because I had such good luck with that one I came to Amazon and found this respirator made by 3M. While I can say the respirator itself works well the straps that hold it in place, excuse me, the straps that are supposed to hold it in place are incredibly inferior. The first problem is the "harness" that pops into place on the front of the respirator itself will absolutely not stay in place, every time I pick the respirator up, or pull it out of my pickup, I have to find all the pieces and reassemble the thing. The second problem is the cheap little tab things that are supposed to provide adjustment, what happened to the good old buckle adjustments? I wish I could find one like my old one, or else find the parts to fix it!

I used this respirator at work and liked it so much that I bought one for myself for use at home.

I wear eye glasses and have a short beard and pretty much every respirator I try either fogs up my glasses or is uncomfortable (glasses arms snagging in straps). This respirator is very comfy and feels super secure.

Excelente mascarilla, profesional y de muy buena calidad es muy cómoda y eficaz para los gases, sugiero que se informen qué tipo de filtros usar. Lo recomiendo ampliamente

Excelente producto

Very comfortable, how are your lungs? Are they sold at Walmart? Protect the ones you have so your not carrying a oxygen tank for the rest of your life. The straps are comfortable and secure very well.

Good quality thanks.