Holikme 30 Feet Dryer Vent Cleaner Kit, Flexible Lint Brush with Drill Attachment, Fireplace Chimney Brushes Extends Up to 30 Feet for Easy Cleaning, Use with or Without a Power Drill

Works really well. the cleaning power of this little thing is impressive. Fit well as the walls were clean on a standard hose. The use is easy and good variety of attachments. Good value for the money as i can use it for several years.

Very well done and put together. It works even at my very very long pipe. But if you don't have a good vacuum....the task will still be annoying to do. Of course i will only buy this item once in my life and use it once per year...so think about the price...is it worth it?.........

Did not come in original packaging but works fine. Had dryer vent cleaned professionally but they cleaned only from outside of the house. This much lint was in the dryer vent in the laundry room.

This kit has everything you need to clean long out of your dryer vent. It is very easy to use and worked great. I got so much lint out of my vent and now my dryer is able to work again.

I used this a few weeks ago and actually put together about 14ft of the sections, as I have a very long dryer vent. My vent was disgusting and I actually had some trouble getting past some of the really caked on lint, but this surprisingly worked so well. I think the key is not to force things and move slowly to dislodge anything larger and pull everything out a few times before continuing and maybe being a little more aggressive. I have 3- 90 degree elbows and was able to work through them without any issue, but I also never forced anything, instead letting the drill slowly turn everything as I advanced the brush forwards and backwards.I literally pulled out enough lint to fill one of those Rubbermaid shallow totes (10 gallon)....that's at least 15 years of lint

The product works as advertised. You'll connect a series of plastic rod extentensions until you reach the desired length. It will blean the dryer vent. In my specific case, two of the plastic rods twisted and broke (separated) while using it. Luckly close to the drill side so I didn't have to fish the other piece inside the dryer vent tube. This is because I was trying to go through 2-3 tight 90 deg bends. The rods are not that flexible and the force required to bend them through the bends might be to much. So, I wouldn't recommend it if you have to go through more than 2 bends.

Very good and easy to use product.

Overall, the product did the job. It removed a good amount of the debris inside the dryer vent. However it can just push it and pile up as you are feeding the rod through the vent making it so that you can’t push it any further so when you use it, it may not take it all out. I had to crinkle the vent and remove the chunk of it out with my hand. Also, the brush got stuck and removed from the rod when I was operating it which was frustrating a bit but I was able to get it out. Also, once the rods are put together, you will not be able to unscrew them by hand and you would have to use a set of pliers to help unscrew the rods. It’s not perfect but it does help clean out the vent to reduce fire hazard. Hopefully it will help reduce my drying time as well.

Acquired this for the vent in my primary residence that was previously owned by three other families.What did I learn while using this in a tight working space (condenser on the left and right, hedge bush in front of it).1. Attach one extension at a a time, route it forward, withdraw it and allow debris to be removed. Then add the next as needed.2. Have two pairs of pliers - when you have to add another extension, the end component that goes into the drill is impossible to remove by hand. I think this is by design3. When finished, each extension will also require two pairs of pliers to loosen the connection between the two parts.4. Ensure your vent cover is also manually cleaned (by hand/brushes, air compressor)5. Ensure you have silicone on hand to provide an outer seal and to keep the critters out!QUALITY: SolidFIT: this fit both the vent and the drillFUNCTION: I used the larger/wider brush and the brush, rods/extensions and the 1/4 inch drill adapter functioned well. The extensions have plenty of bend/give to them.VALUE: clogged vents are a known fire hazard. Preventing a future fire is wisdomPRICE: reasonable, comparableI wouldn’t call this a fast process, but the components design and function make this more speedy than other manual methods.And how much lint was there? A Basketball sized amount was removed from a 20 ft run

The dryer duct brush kit worked perfectly. I was astonished at the amount of lint and dust that it removed from my dryer. A+ for me. Pictures show post brush debri and first time turnd on air setting.

This kit was very easy to use, and the flexible rods make it simple to reach different lengths. The brushes clean evenly and help access areas that are usually hard to reach. The materials feel durable, and the design is practical, especially since it can be used without extra tools. After several cleaning sessions, it has worked reliably and consistently. Overall, it has been a useful tool for maintaining the duct.

Very pleased with the performance. I installed the 4" hard pipe myself 8 years ago, with 1 90 and two 45 degree bends. I needed 22 feet, and using a drill, the brush and rod negotiated the canal with ease. Once got to the vent, I simply pulled it back through, and got very little resistance. I took an electric leaf blower and stuck it in the pipe, wrapped a rag to seal it, and ran it for a minute. There outside, lay a huge pile of lint! Shop vac took care of that. This goes on my calendar for yearly maintenance from now on. I additionally removed the dryer back, pulled and cleaned the duct and vacuumed all around. The rods that came with it seem to be very sturdy, with clean threading, and require only a little effort with 2 pliers to break and separate. The money I saved, and the experience I got, was was worth far more than the 20 bucks this cost.