10 Inches European Design Transparent Standard Whole House Water Filter System with Presser Relief Valve, 3/4” Inlet/Outlet Brass Port and Yearly Supply (4) Pleated Sediment Cartridges 5 Micron
Inhouse product
- DURABLE STRUCTURE: 10” Transparent Standard Housing is proper for heavy sediment applications. The housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness. The cap has 3/4" inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. 10” Standard 5 Micron Pleated Sediment Filters Used for effectively removing most sediments from water
- POINT OF USE: This System for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, well water filtration, food service, and irrigation. Extends life of Washing Machines, Water Heaters & Other Household Appliances. Keeps water fresh by reducing sediment, scale, rust, dirt, sands, and silt
- EASY TO OPERATE: There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. Unique cap design allow quickly and easy to remove housing to replace cartridges. Transparent housing body allows visually to determine when cartridge should be changed
- 5 MICRON PLEATED SEDIMENT CARTRIDGE is wrapped and sealed and meets NSF Standards and Regulations. Dimensions: 9.875” x 2.5”. WELL-MATCHED: Harmsco 801-50 and 801-50W, American Plumber W50PE, Dupont WFPFC3002, Watts FM-50-975, Aquasana EQ-PFC.35, Neo-Pure PS-27097-50, Whirlpool WHKF-WHPL, Hydronix SPC-25-1050, and ECP10-1, however for best preferment use only original RONAQUA CARTRIDGES
- WELL-MATCHED FOLLOWING HOUSINGS SYSTEMS: DuPont WFPF38001C, WFPF13003B, Culligan WTR Filter HF-360A and HF-150A, American Plumber WC34-PR, Geekpure RO5-FH10, Hydronix HF3-10CLBK34, EcoPure EPW2
| Brand | Ronaqua |
| Special Feature | 10" Transparent Standard Housing for Whole House Water Filtration System |
| Product Dimensions | 5"L x 5"W x 13"H |
| Package Information | Canister |
| Installation Type | ¾ inch brass port |
| Power Source | Manual |
| Item Weight | 2 Pounds |
| Model Name | RA-125 |
| Maximum Flow Rate | 5 Gallons Per Minute |
| Upper Temperature Rating | 125 Degrees Fahrenheit |
| Material | Brass |
| Included Components | Filter Housing |
-
amani.rosenbaum@ondricka.com
08-03-2026It didn't fit mine according to the especifications
-
babineuxjkplwacr5522@gmail.com
08-03-2026This is easy to install and the design is perfect I can see when it needs to be changed perfect for our Monaco Windsor coach
-
kimberlyujlindaov4672@gmail.com
08-03-2026Easy installation and great filters
-
zajkosta7@gmail.com
08-03-2026Had to buy a few extra parts but easy install, seem to help water,, time will tell..
-
lourdesharr27@gmail.com
08-03-2026Very sturdy and i love how it comes with filters already. Greqt product.
-
cardijuaydenb@gmail.com
08-03-2026DO NOT BUY THESE FILTERS!!!I'm giving one star because I can't give less. I bought three for whole house filtering. They came with no instructions. I had thought the o-rings were to go between canister and head but they actually go into a groove at the top of the canister and they do seal. I had all thre aligned and fitted and did the test outside with the hose and sure enough it leaked everywhere. I used PVC and one turn of teflon tape on the threads of the PVC adapters at each end as it should be but all connections leaked as the PVC screws in okay but doesn't fit tight. CPVC fittings worked.DO NOT touch the pressure release screws on top of the head as it will no longer work. They are simply a metal screw with a o-ring that is supposed to tighten into the soft polypropylene but being so soft the screw just strips out of the polypropylene. I am trying other ways to seal that screw. So if I am able to install these without leaks I will release water pressure from now on by turning on a faucet after turning off the water.The other problem is the screws that hold the canister head to the bracket are too big for the holes. I split a few posts screwing them in before I realized this and so had to heat the screws , just enough, so they would cut their way in without splitting the rest of the posts. Then I epoxied the splits as polypropylene supposedly can be epoxied. I have my doubts. Remember polypropylene will degrade quickly in UV. Think cheap blue tarp.A better buy would be filters made of polyethylene or a more rigid plastic.So a word of advice... before cutting into the main water line buy some fittings so the unit can be tested with the yard hose for leaks. And always turned the main water off and open a faucet to release pressure. Do not touch those screws! I will update this reveiw when I either have the filters installed or decide to buy other ones.UPDATE: 6.29.25, I used these filters and on 6.27.25 We woke to the sound of running water to find that a pressure release screw had popped out of it's threaded hole. I have installed thre of these for different filters. The other two screws were in place so I know it wasn't from too many psi's as our water pressure can be controlled. I have had trouble with these screws when installing. I used methyl methacrylate to bond the screw into the polypropylene hole in the top of the canister head and then took a cedar shim and wedged it between the canister head holding bracket and the canister head. I did this on all three and should have done when I installed them. Hundreds of gallons of water was on the basement floor and ceiling where it shot up through the hole. It is a mess that will take quite a while to clean up and cost me time and money because water ain't cheap!If you buy these filters take my advice and do what I have written in this review or you WILL have problems.
-
marynewhousei5946@gmail.com
08-03-2026I installed this on a well water source and you can see all the sand it filters out.
-
gottlieb.ewell@gmail.com
08-03-2026Good
-
ama******
It didn't fit mine according to the especifications
bab******
This is easy to install and the design is perfect I can see when it needs to be changed perfect for our Monaco Windsor coach
kim******
Easy installation and great filters
zaj******
Had to buy a few extra parts but easy install, seem to help water,, time will tell..
lou******
Very sturdy and i love how it comes with filters already. Greqt product.
car******
DO NOT BUY THESE FILTERS!!!I'm giving one star because I can't give less. I bought three for whole house filtering. They came with no instructions. I had thought the o-rings were to go between canister and head but they actually go into a groove at the top of the canister and they do seal. I had all thre aligned and fitted and did the test outside with the hose and sure enough it leaked everywhere. I used PVC and one turn of teflon tape on the threads of the PVC adapters at each end as it should be but all connections leaked as the PVC screws in okay but doesn't fit tight. CPVC fittings worked.DO NOT touch the pressure release screws on top of the head as it will no longer work. They are simply a metal screw with a o-ring that is supposed to tighten into the soft polypropylene but being so soft the screw just strips out of the polypropylene. I am trying other ways to seal that screw. So if I am able to install these without leaks I will release water pressure from now on by turning on a faucet after turning off the water.The other problem is the screws that hold the canister head to the bracket are too big for the holes. I split a few posts screwing them in before I realized this and so had to heat the screws , just enough, so they would cut their way in without splitting the rest of the posts. Then I epoxied the splits as polypropylene supposedly can be epoxied. I have my doubts. Remember polypropylene will degrade quickly in UV. Think cheap blue tarp.A better buy would be filters made of polyethylene or a more rigid plastic.So a word of advice... before cutting into the main water line buy some fittings so the unit can be tested with the yard hose for leaks. And always turned the main water off and open a faucet to release pressure. Do not touch those screws! I will update this reveiw when I either have the filters installed or decide to buy other ones.UPDATE: 6.29.25, I used these filters and on 6.27.25 We woke to the sound of running water to find that a pressure release screw had popped out of it's threaded hole. I have installed thre of these for different filters. The other two screws were in place so I know it wasn't from too many psi's as our water pressure can be controlled. I have had trouble with these screws when installing. I used methyl methacrylate to bond the screw into the polypropylene hole in the top of the canister head and then took a cedar shim and wedged it between the canister head holding bracket and the canister head. I did this on all three and should have done when I installed them. Hundreds of gallons of water was on the basement floor and ceiling where it shot up through the hole. It is a mess that will take quite a while to clean up and cost me time and money because water ain't cheap!If you buy these filters take my advice and do what I have written in this review or you WILL have problems.
mar******
I installed this on a well water source and you can see all the sand it filters out.
got******
Good
PURE WATER IN EVERY DROP!
Previous page
For more info visit our store
For more info visit our store
For more info visit our store
Next page10" Transparent Whole House Water Filter System, Presser Relief Valve, 3/4” Inlet/Outlet Brass Port & Yearly Supply (4) Pleated Sediment Cartridges
Filter Cartridges Included in this Set are Pleated Sediment Water Filter Cartridge, Amplified Surface Area (4 pack)
These Sediment Water Filters Intercept all Following Impurities
Specifications
Ronaqua pleated sediment water filters reduces sand, dirt, silt, rust, and scale particles in residential and commercial water. Pleated filters are made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. These materials trap suspended particles, materials that block and adsorb unwanted chemicals or substances that cause a chemical change to the water, such as acid neutralization. The pleated design provides an amplified surface area that may extend the filter’s life while removing undesirable particles and chemicals from the water by means of a semipermeable barrier, adsorption, and biological processes. Pleated filters are washable and reusable.
A significant advantage of pleated filters is that they protect against a lower pressure drop and allow increased water flow rates. Overall, pleated cartridges outperform standard wound, spun, and melt blown filters because of their re-usability. The Ronaqua pleated sediment water filters have a flow rate of five gallons per minute (GPM). Because these filters are cleanable, the savings are passed down to users through increased filter lifespans and the best part is that these filters fit all 10-inch water filter housings.
What is a Pleated Sediment Filter?
The Pleated Sediment Filter is much similar to the properties of a regular sediment filter. It is able to filter out physical impurities such as dirt, silt, sand, and sediment; it could also be used in filtration systems as the first stage filtration system. The pleated sediment has a longer lifespan than the regular sediment because of the increased surface area of the filter as well as its material composition; you are able to wipe down and clean this filter of its collected dirt to continue using it.
Related products
