Olympic Barbell Hanger,Garage Gym Bar Wall Rack,Vertical Barbell Mount Rack,Black Powder Coated,Space Saving Commercial or Home Gym Accessory,Holds Under 33mm Bar Size
Inhouse product
- Sturdy & Durable - The barbell wall holder is made of high quality steel plate. Then there is a thick, durable, coarse powder coating on the surface. All the fingers/combs are spaced apart to avoid overlapping, thus protecting your equipment and shelves from scratches
- Protective Pad Designed - The barbell hanger is sprayed with a matte matte anti-rust layer and comes with a rubber pad to protect your barbell coating.The surface is smooth and durable against rust.Provides good care for your steel bars, and you can use them for a long time
- Perfect Size - The barbell rack dimensions of 1 bar holders are 3.26 x 3.93 x 4.33 inches.The gap between the prongs is 32mm. Compatible with Standard or Olympic bars with diameter 25-28mm or many other bars with a diameter within 32mm.Compact design can be set up anywhere in the house or training space; Suitable with various surfaces including wall, stone, cement
- Easy to Install - Only a few minutes is needed to install the weight bar storage to your wall.There is an instruction manual in the package to guide on installing the vertical barbell holder, the steps are simple along with the hardware needed
- Multi-Purpose & Space Saving - This wall mount barbell holder can effectively save more space and store your fitness equipment neatly.Multi-purpose for hanging Olympic barbells, curl bars, chains, resistance band, jump ropes, and other workout equipment
| Brand | JNIHEEP |
| Material | Metal |
| Product Dimensions | 3.93"D x 3.26"W x 4.33"H |
| Style | Modern |
| Item Weight | 14.38 Ounces |
-
amarisriverz32910@gmail.com
08-03-2026Great Rack works really well
-
lugarmelgar@gmail.com
08-03-2026I'm currently using this to hold an easy bar on the wall but it would certainly hold a men's standard Olympic bar (45 lbs). I even tested a hex bar with it... not sure of the weight of the hex bar but it is at least 40 lbs... this mount held it up easily. It was pretty simple to install by myself with the use of a cordless drill to create pilot holes and a screwdriver to put in the screws. I screwed it into a stud using a stud finder. My main tip is to make sure you measure the length of the collar of the bar you want to hang and leave a few inches of clearance to there is room to lift your bar up and into the bracket, because you can't just slide it straight in due to the little tabs on the face of the mount that keep the bar from slipping out.
-
igwirzhnvshsgw836@gmail.com
08-03-2026It's good quality, easy to assemble and does exactly what it's supposed to do. It's very sturdy with top notch mounting screws. It's well worth the money.
-
inverasharonor8292@gmail.com
08-03-2026These hangers look great. It fits a variety of different bars that I own. A huge upgrade to my gym, it helps me keep unused equipment organized and out of the way.
-
ccharlesirving@gmail.com
08-03-2026Very sturdy. Seems to hold a good bit of weight and I glad the hardware screws into the same spot so that both screws are in the stud.
-
tintinkh048@gmail.com
08-03-2026The bar holder was very easy to install and holds the bar fine with no issue would recommend
-
jklarisaruthub5516@gmail.com
08-03-2026Easy to set up. Holds a standard Olympic weight bar. Solid metal so good quality. Easy to hang up at any point for organization. All hardware is included to set it up minus the drill.
-
maggio.nelda@hotmail.com
08-03-2026very strong! perfect
-
giovani.weber@swaniawski.info
08-03-2026Tried to install this with the given hardware and they just snapped off. First off, they are a little large in diameter, then they were a little long in my opinion.Get a concrete bit, be careful when you torque them down (mine broke off). Make sure the hole size is correct or they will not work.I ended up mounting it in a different way. Seems fine holding my Olympic bar of ~36 lbs.Overall, working as intended with modification.
-
ama******
Great Rack works really well
lug******
I'm currently using this to hold an easy bar on the wall but it would certainly hold a men's standard Olympic bar (45 lbs). I even tested a hex bar with it... not sure of the weight of the hex bar but it is at least 40 lbs... this mount held it up easily. It was pretty simple to install by myself with the use of a cordless drill to create pilot holes and a screwdriver to put in the screws. I screwed it into a stud using a stud finder. My main tip is to make sure you measure the length of the collar of the bar you want to hang and leave a few inches of clearance to there is room to lift your bar up and into the bracket, because you can't just slide it straight in due to the little tabs on the face of the mount that keep the bar from slipping out.
igw******
It's good quality, easy to assemble and does exactly what it's supposed to do. It's very sturdy with top notch mounting screws. It's well worth the money.
inv******
These hangers look great. It fits a variety of different bars that I own. A huge upgrade to my gym, it helps me keep unused equipment organized and out of the way.
cch******
Very sturdy. Seems to hold a good bit of weight and I glad the hardware screws into the same spot so that both screws are in the stud.
tin******
The bar holder was very easy to install and holds the bar fine with no issue would recommend
jkl******
Easy to set up. Holds a standard Olympic weight bar. Solid metal so good quality. Easy to hang up at any point for organization. All hardware is included to set it up minus the drill.
mag******
very strong! perfect
gio******
Tried to install this with the given hardware and they just snapped off. First off, they are a little large in diameter, then they were a little long in my opinion.Get a concrete bit, be careful when you torque them down (mine broke off). Make sure the hole size is correct or they will not work.I ended up mounting it in a different way. Seems fine holding my Olympic bar of ~36 lbs.Overall, working as intended with modification.
JNIHEEP Barbell Holder
Space Saving for Home or Gym
Previous page
Single Barbell Wall Holder
Double Barbell Wall Holder
3 Hooks Barbell Wall Holder
Gym Equipment Storage Rack
Gym Equipment Storage Rack
Next page
Olympic Barbell Hanger
Olympic Barbell Hanger Previous page
Next page
Product Details
Previous page
Next page
Gym Bar Wall Rack
Previous page
Next page
Previous page
Step 1 Mark the holes distance
Step 2 Drill the holes
Step 3 Install expansion screws
Step 4 Tighten the screws
Step 5 Complete!
Next pageDrilling Installation
1 Mark hole distance 2 Drill holes 3 Install expansion 4 Tighten the screws 5 CompleteRelated products
