CORSAIR RS120 ARGB 120mm PWM Fans – Daisy-Chain Connection – Low-Noise – Magnetic Dome Bearing – Triple Pack – Black

I'm very happy with these fans! They work perfectly and the ARGB lighting looks fantastic in my case. They're quiet and move a good amount of air, so they're a great value for the price.My only piece of advice for other buyers is to pay close attention to the wiring. The product description or manual should show you which cables are for power and which are for the ARGB lighting. It's really important to check that these wires are designed to "daisy chain," which means you can connect one fan's cable to the next, simplifying the wiring and reducing clutter. If you take the time to plan your cable management, the installation process will be very smooth.Overall, a great purchase!

très bon ventilo silencieux et possible de synchronisé led RGB

ممتازة جدا سرعتها عالية وممتازة للتهوية

Decided to build a new PC. Mine was close to seven years old, though still serviceable. Decided to go all new and to focus on AMD, ASUS TUF, and Corsair parts. Not sure how you can go wrong with these brands and models. Top of the line bring top of the line quality, ease of use, great cooling, awesome looks, modern functionality, and was a breeze to assemble. Highly recommend! System specs include...Motherboard: ASUS TUF X670E-PLUS WiFiCPU: AMD Ryzen 7 9800X3D (16) @ 5.27 GHzGPU: AMD Radeon RX 9070 XTG.Skill Flare X5: 2x16 (32G)Samsung 990 Pro M.2 SSD: 2 TBCorsair 4000D Airflow Case7 x Corsair 120MM Case Fans

I got these for my PC build to replace some older fans, and I’m honestly impressed. They were super easy to install, and the airflow difference was noticeable right away — temps dropped a few degrees under load. The RGB looks really clean, not overly flashy, and syncs perfectly with my setup. What surprised me most is how quiet they are, even at higher speeds. My rig runs cooler and looks way better now. If you’re upgrading or just want fans that do the job and look good doing it, these are a solid choice.

The CORSAIR RS120 ARGB 120 mm PWM Fan delivers a strong balance of performance, versatility, and quiet operation. Its daisy-chain PWM and ARGB connectors simplify installation and cabling, letting you control multiple fans from a single motherboard header. The magnetic-dome bearing reduces friction and noise while extending fan lifespan. AirGuide-optimized blades generate concentrated airflow and enough static pressure to handle radiators or dense case layouts. Adjustable PWM speeds (up to 2100 RPM) offer high airflow when needed and nearly silent operation under light loads thanks to zero-RPM mode. Overall, this fan is a solid choice for building a clean, effective, and visually pleasing PC cooling setup.

Habe ein 3er Set von den Corsair RS120 ARGB in schwarz gekauft und diese im Frame 4000D RS ARGB verbaut und bin recht zufrieden mit den Lüftern, auch wenn diese nicht so Leise sind, wie erhofft, dafür Punktet das Set mit guten Werten, was die Luftbewegung betrifft. Da die Lüfter über Daisy-Chain verfügen, wurde hier die Längen der Kabel dementsprechend gekürzt, um so ein sauberes Kabelmanagement zu ermöglichen - leider hat das den kleinen Nachteil, dass wenn man die Lüfter für den Outtake klassisch anordnet (einer Hinten, zwei Oben), dann kann es durchaus knapp werden mit dem Verbinden, dafür hat Corsair hier jeweils zwei PWM und zwei ARGB Verlängerungen mit beigefügt, die lang genug sind, um die Kabel mit dem Mainboard zu verbinden, was letztlich ein wenig Ärgerlich ist, wenn an den eigentlichen Kabeln deswegen 2 bis 3 cm fehlen, um die einzelnen Lüfter zu verbinden.Lautstärkemäßig sind die Lüfter erst unter ca 30% PWM Lüfterdrehzahl kaum hörbar, darüber hinaus nimmt man diese schon wahr, vor allem wenn der PC auf Kopfhöhe steht, denn ein leichtes Surren ist immer noch zu hören, was aber nicht nervig ist. Bei mir Laufen alle 6 RS Lüfter auf ca 650 RPM.Positiv finde ich die Werte vom Luftstrom, die trotz niedriger Drehzahlen noch genug Luft durch das Gehäuse wälzen. Die Lüfter leisten einen Luftstrom von 13.3 bis 72.8 CFM und einen statischen Druck von 0.2 bis 4.15 mm-H2O - Lüfterdrehzahlen - 420 bis 2200RPM (HW-Info Auslesung)Im Ganzen ein durchaus gutes Produkt, was völlig ohne iCue auskommt, der Preis von Aktuell ist mMn hart an der Grenze, aber vertretbar, dennoch würde ich erst ein weiteres mal wieder zuschlagen, wenn der Preis für das 3er Set wieder unter 40€ ist.Fazit:Gut: Luftstrom, kein iCue benötigt, Daisy-ChainNeutral: etwas knappe KabellängeSchlecht: Nicht so leise wie erhofftVon mit gibt es 4.5 von 5 Sternen, mit leichter Tendenz nach Oben, falls es mal ein Angebot unter 40€ gibt.

Replaced a couple fractal aspect 120s with these 140s and my CPU temp at full load dropped by 5+ degrees, from mid 80s to high 70s (5800x3d with a Thermaltake Fs 140). They’re just about dead silent at idle and audible but tolerable at higher RPMs, no annoying whine or whistle with these just a rush of air. Wanted RGB for the kids and the colors and diffusion look fine to my eye. These are pricey however they don’t have rubber pads at the mount holes and they have comically short power and RGB cables which caused an additional purchase of 4 pin extension cables. A nice long RGB cable on my 120mm thermalright cpu fan had a daisy chain part to it and is the only reason I could finish the build without RGB extension cables. So these aren’t perfect but they’re fair quality with decent overall performance. Hope they last!

Purchased the three pack of fans. Package included:- 12 mounting screws, enough for all 3 fans- 2 extension cords to allow you to connect fans to the mother board.- 3 fans, each having a male/female connection cords to allow you to daisy chain the fans. The length of cable to the female connection is very short, and will likely not connect to the motherboard on its own without an extension cord, but has enough room to daisy chain to another fan. So with only being given 2 extension cords, at least 2 of the fans will need to be daisy chained together without buying additional cables.Installation was easy, dimensions were as advertised.Airflow is very good. In my set-up the fans defaulted to maximum speed and I had to tinker in my BIOS to lower the fan speed. At maximum speed, there was a noticeably loud humming noise that couldn't be corrected. At lower fan speeds, the humming noise stopped and fan noise was quiet.

love them, matchy

Bought 3 of these to replace the Thermaltakes which came with my CPU cooler when Thermaltake refused to RMA just the fans. Even though I bought these "used" (aka repackaged), they came in good condition and had all the parts & pamphlets that mattered. They have a high static pressure (nearly 3.5mm H2O), and are rather quiet even at max speed. Keeps temps low even on my monster 14900k. One fan did come with short cables (~3 inches), but since I chained them all on a radiator the length didn't matter. The RGB works fine, and syncs with my motherboard's other JARGB1 via OpenRGB. Looks no worse than the originals. Will update in a few months whether the quality stays high.

Good item, easy to install, doesn't require a separate hub to work so it's seamless with no bs.RGB could look better though.

These are very good fans which won't break the bank. The can be a bit noisy at times, especially if you are like me, that has to have them on full power all the time. Sounds like a swarm of bees. But chances are you won't need to tweak the speed. Between the CPU, GPU, and 36TB of storage, these fans are working overtime, plus it downloads all night long and sometimes I give it a break. I highly recommend these for their price, airflow, and quality. The pix are of the same fan only white. I installed the black ones then had to get others for reasons I just stated, and I opted for the white ones. They are also as I type in my rig, but the fans are hidden by the sides and my rig is ti heavy for me to get a pic of them installed. The review was an afterthought. Apologies