| Brand | Acoustic Audio by Goldwood |
| Speaker Maximum Output Power | 200 Watts |
| Frequency Response | 45 Hz |
| Connectivity Technology | Wired |
| Audio Output Mode | Surround |
Acoustic Audio by Goldwood R192 Frameless Flush Mount In Ceiling 5 Speaker Set Center Channel with Front and Rear, Right and Left home theater configuration Wide Sound Dispersion Designed Speakers easily integrate with new and existing audio systems Traditional Passive speaker design, simply drive power from your home audio receiver or amp Flush Mount low profile housings install easy with unique Pressure Lock Mounting System Paintable edge-to-edge grills magnetically attach over the frames giving a frameless appearance Full Range sound coverage with 2-way woofer and tweeter configuration 5. 25" High Rigidity Poly cone woofers with progressive spiders and butyl rubber surrounds . 5" Mylar tweeters Frequency response is 45Hz-22 kHz with 95dB at 8ohm Pressure Lock Mounting System clamps tight to drywall with No Hardware Needed Fits round speaker hole size of 7" with a mounting depth of 3" Overall speaker size of 7. 9" with Spring Loaded raw wire connections System Requirements Any home audio receiver or amplifier with raw speaker wire outputs Your receiver power should be no less than 10 and no more than 200 watts per channel CL3 Rated in wall certified raw speaker wire to connect your receiver to the speakers Applications Home Theater Surround Sound Systems Whole House Audio Systems Business or Retail Installations What's in the box 5 Flush Mount Passive Speakers with Removeable Grills Cut-Out Templates Instruction Manual
Made hight speaker fo my my 5.2.4 dénoncer 3700h the reste of my speaker are clipch perfect match nothig bad to sa thèse super chapeau good
I used this speaker setup with a sony receiver in a 1500 sq foot open retail space. The speakers were installed in drop ceiling. They mount firmly and securely. I suggest using different wire than the leads they provide. Little things like a good receiver/amplifier and a good wire can make even cheaper speakers sound great. At a low volume rating, these speakers provide plenty of sound and since they were daisy chained the load isn't too high on the receiver. Worth the money so far.
Bought these with the Yamaha RX-V679BL and that 10" Polk sub. Sounds ok, for music as long as you're not wanting to turn it up to party level. For home theatere applications, I would definetly recommend you look elsewhere. I'm immediately replacing the center channel speaker with a bonified center channel speaker because when watching a movie you can't hear any dialogue with these speakers. I may actually replace all of them and move these to somewhere else in the house.
I used this speaker among the house.Good sound quality.Sufficient for medium room
For the price these are hard to beat. I use them for ambient music, and they’re perfect.
I'm very pleased with the sound quality from these speakers. I saw some complaints in the reviews but their audio issues are likely from poor soldering joints or loose connections of the supplied crimped wires. I would recommend soldering your own 16awg speaker wire.My only complaint is the terminals on the speakers are on the smaller side so it's a bit tricky getting a mechanical connection with 16awg wire prior to laying down solder. This is a very minor complaint though. Overall VERY pleased with this purchase and would recommend for a budget 5.1 setup. I have this installed in my loft for gaming and movies and is connected to a Sony STRDH590 receiver.
QualityIf higher volume speakers are vibrating
I bought 2 of the 5 packs to setup my 9 speaker surround sound. I have it set up with 5.1.4 (4 overhead speakers for Dolby Atmos) and it sounds great. There is one overhead speaker that sounds different than all the rest, not sure if it's the speaker or if some insulation got inside but I have an extra one to swap out if needed. These sound great and are crystal clear at any volume. Don't expect Bose level performance but these are great for the price. Very clean looking with the frameless ones. They look much better than their other style of speakers. The speaker covers can be easily taken off if needed as they are held on by magnets. The speakers themselves are hidden behind the cover, there is a cloth like material on the metal cover to help hide them more. Comes with a template to cut the hole out of the wall and these slide in and mount in place super easy. They are very secure in the wall. I haven't heard any rattles or anything like that. 2 way speakers are actually the better way to go if you are buying cheaper speakers. Couldn't be happier with my purchase.
Overall: I was blown away by how well built these speakers were and how easy the installation was! I installed them all over my dental office into removable foam ceiling panels and it was so easy due to the speaker coming with an integrated mounting bracket. Just cut the circle, slip the wire through and the speaker clamps down in a few seconds with the help of a phillips head on a drill.Sound quality: The sound is excellent for this specific purpose (high treble, low bass), but I wouldn't be very likely to install these for a 7.1 surround sound experience due to the lack of range. Again, I knew this buying them and have zero regrets. I keep them playing music (on a pretty low volume) all day and have only been using them for a week now but everyone has been so pleased with the sound quality. We usually crank them up to about 70% at the end of the day and jam out a little and even then, they sound great.Installation: Super simple even without instructions if you're techy. If not, follow the instructions on the mildly confusing paper that comes with it. I would recommend using a better quality wire. I set up one speaker with the included wire and it sounded great but then compared it to my InstallGear 14G premium wire and it wasn't a fair comparison. Just solder the wire to the terminals and wrap the exposed metal in some sort of electrical barrier for safety.Excellent product 10/10 would buy again.Hope this helps!
These in-ceiling speakers are fantastic. They're very easy to install and come with a good template for cutting in walls or ceilings. I wouldn't recommend the wire that comes with it. It's quite thin.Here's my tips for ceiling mounting:-take one of the templates and find the center. Put a nail through the center. When you have a place where you think you want the speaker, nail up the template. This way you can step back and see if it's in the right spot. Draw around the template with pencil and take the template off.-always check what's behind your drywall when cutting into a ceiling or wall!-use a sharp jab saw to cut out the circular template you've drawn onto the ceiling. Cut just outside the line. The speaker has a lip, so don't be too afraid. Cutting inside the template will make it really difficult to put the speaker into the ceiling.-use a drop cloth or a large garbage bags just under your cutting surface to catch the drywall when cutting.-gently push the screws from the back and the speaker grill will pop out.-test fit the speaker in the hole! It should just fit without forcing, but definitely not super loose. The hole should be completely covered by the lip. Then pull it back out.-while the speaker is out, you can pull your speaker wire through the hole and either add wore harnesses to slip on the speaker's tabs or solder directly. Doing it while outside of the ceiling will make it much easier than crouching in a hot attic. Trust me.-put everything back through the hole and screw it down. You can use a drill, but the screws should be hand tight, not so right it breaks the plastic!Add a powered subwoofer and a nice receiver and you have yourself a very nice speaker system!
I wasn't sure what to expect from these speakers considering the cost. Installed in a suspended ceiling, the provided templates were perfect for an exact fit. I had pre-run my wires so after install they were plug and play. Sound quality is really good. I have a subwoofer but even without it these speakers hold their own. I used a YouTube Dolby surround video to test the 5.1 capabilities and the channels were easily recognizable and sounded good at high volumes. Definitely pleased with this purchase and would recommend this set.
I used these for surround sound and work perfectly for our use. Great price
Made hight speaker fo my my 5.2.4 dénoncer 3700h the reste of my speaker are clipch perfect match nothig bad to sa thèse super chapeau good
I used this speaker setup with a sony receiver in a 1500 sq foot open retail space. The speakers were installed in drop ceiling. They mount firmly and securely. I suggest using different wire than the leads they provide. Little things like a good receiver/amplifier and a good wire can make even cheaper speakers sound great. At a low volume rating, these speakers provide plenty of sound and since they were daisy chained the load isn't too high on the receiver. Worth the money so far.
Bought these with the Yamaha RX-V679BL and that 10" Polk sub. Sounds ok, for music as long as you're not wanting to turn it up to party level. For home theatere applications, I would definetly recommend you look elsewhere. I'm immediately replacing the center channel speaker with a bonified center channel speaker because when watching a movie you can't hear any dialogue with these speakers. I may actually replace all of them and move these to somewhere else in the house.
I used this speaker among the house.Good sound quality.Sufficient for medium room
For the price these are hard to beat. I use them for ambient music, and they’re perfect.
I'm very pleased with the sound quality from these speakers. I saw some complaints in the reviews but their audio issues are likely from poor soldering joints or loose connections of the supplied crimped wires. I would recommend soldering your own 16awg speaker wire.My only complaint is the terminals on the speakers are on the smaller side so it's a bit tricky getting a mechanical connection with 16awg wire prior to laying down solder. This is a very minor complaint though. Overall VERY pleased with this purchase and would recommend for a budget 5.1 setup. I have this installed in my loft for gaming and movies and is connected to a Sony STRDH590 receiver.
QualityIf higher volume speakers are vibrating
I bought 2 of the 5 packs to setup my 9 speaker surround sound. I have it set up with 5.1.4 (4 overhead speakers for Dolby Atmos) and it sounds great. There is one overhead speaker that sounds different than all the rest, not sure if it's the speaker or if some insulation got inside but I have an extra one to swap out if needed. These sound great and are crystal clear at any volume. Don't expect Bose level performance but these are great for the price. Very clean looking with the frameless ones. They look much better than their other style of speakers. The speaker covers can be easily taken off if needed as they are held on by magnets. The speakers themselves are hidden behind the cover, there is a cloth like material on the metal cover to help hide them more. Comes with a template to cut the hole out of the wall and these slide in and mount in place super easy. They are very secure in the wall. I haven't heard any rattles or anything like that. 2 way speakers are actually the better way to go if you are buying cheaper speakers. Couldn't be happier with my purchase.
Overall: I was blown away by how well built these speakers were and how easy the installation was! I installed them all over my dental office into removable foam ceiling panels and it was so easy due to the speaker coming with an integrated mounting bracket. Just cut the circle, slip the wire through and the speaker clamps down in a few seconds with the help of a phillips head on a drill.Sound quality: The sound is excellent for this specific purpose (high treble, low bass), but I wouldn't be very likely to install these for a 7.1 surround sound experience due to the lack of range. Again, I knew this buying them and have zero regrets. I keep them playing music (on a pretty low volume) all day and have only been using them for a week now but everyone has been so pleased with the sound quality. We usually crank them up to about 70% at the end of the day and jam out a little and even then, they sound great.Installation: Super simple even without instructions if you're techy. If not, follow the instructions on the mildly confusing paper that comes with it. I would recommend using a better quality wire. I set up one speaker with the included wire and it sounded great but then compared it to my InstallGear 14G premium wire and it wasn't a fair comparison. Just solder the wire to the terminals and wrap the exposed metal in some sort of electrical barrier for safety.Excellent product 10/10 would buy again.Hope this helps!
These in-ceiling speakers are fantastic. They're very easy to install and come with a good template for cutting in walls or ceilings. I wouldn't recommend the wire that comes with it. It's quite thin.Here's my tips for ceiling mounting:-take one of the templates and find the center. Put a nail through the center. When you have a place where you think you want the speaker, nail up the template. This way you can step back and see if it's in the right spot. Draw around the template with pencil and take the template off.-always check what's behind your drywall when cutting into a ceiling or wall!-use a sharp jab saw to cut out the circular template you've drawn onto the ceiling. Cut just outside the line. The speaker has a lip, so don't be too afraid. Cutting inside the template will make it really difficult to put the speaker into the ceiling.-use a drop cloth or a large garbage bags just under your cutting surface to catch the drywall when cutting.-gently push the screws from the back and the speaker grill will pop out.-test fit the speaker in the hole! It should just fit without forcing, but definitely not super loose. The hole should be completely covered by the lip. Then pull it back out.-while the speaker is out, you can pull your speaker wire through the hole and either add wore harnesses to slip on the speaker's tabs or solder directly. Doing it while outside of the ceiling will make it much easier than crouching in a hot attic. Trust me.-put everything back through the hole and screw it down. You can use a drill, but the screws should be hand tight, not so right it breaks the plastic!Add a powered subwoofer and a nice receiver and you have yourself a very nice speaker system!
I wasn't sure what to expect from these speakers considering the cost. Installed in a suspended ceiling, the provided templates were perfect for an exact fit. I had pre-run my wires so after install they were plug and play. Sound quality is really good. I have a subwoofer but even without it these speakers hold their own. I used a YouTube Dolby surround video to test the 5.1 capabilities and the channels were easily recognizable and sounded good at high volumes. Definitely pleased with this purchase and would recommend this set.
I used these for surround sound and work perfectly for our use. Great price
Previous page
About Us
Acoustic Audio by Goldwood uses state of the art technology and the best materials to design and produce the highest quality audio products in the industry.
Our product line covers solutions for both home and public use, including home audio systems, outdoor speakers, ceiling and in-wall speakers, car and marine audio, pro speakers and equipment.
Next page
Goldwood Sound manufactures the high quality audio products.