| Brand | YesBes |
| Color | White |
| Material | Plastic |
| Style | 116in |
| Product Dimensions | 14.5"L x 0.96"W |
This cord hider kit is okay. It does what it's supposed to do by hiding ugly TV and entertainment center wires, which is the main reason I bought it.The pros are that it's easy to cut to size with a utility knife and the adhesive sticks well to clean, painted walls. The white color is inoffensive.However, there are a few cons:· Noticeable Profile: The dimensions (almost 1 inch wide and over half an inch tall) make it more prominent on the wall than I expected. It doesn't blend in seamlessly; it looks like a long, white box running down your wall.· Difficult to Paint: The plastic material feels cheap and doesn't take paint well. I had to use a primer and several coats to get it to match my wall color, and even then, it doesn't look perfect.· Assembly Can Be Tricky: Getting all the wires to stay inside the channel while you snap the cover on is fiddly. If you have several thick cables, it can be a tight fit and the cover doesn't always want to snap shut cleanly.Bottom Line: This is a functional, basic solution if you just want to tidy up cords quickly and don't mind the look of a plastic raceway. But if you're looking for a low-profile, discreet hider that will truly blend into your wall, this might not be the best choice. It works, but it's not elegant.
Perfect for covering wires. I used this to hide wires on the outside of my house. It worked perfectly. Easy to install and cut. I used a pair of tin snips to make the cuts.
Effortlessly routed 4 speaker wires around the room. I could perhaps fit 6 if I had to. They are not refrigerator-white like some other ones I have which makes it more appealing next to various shades of off-white.The covers can be slid on or pushed on which makes it easy to work with. I wish it included a few horizontal T-fittings but the inside-elbow was good enough for making T-junctions.I didn’t use the sticky back as I felt they would damage the paint but laying them on the floor, by the walls, and under pressure from the wires, it will not budge.I will surely order it again.
These worked great. They stuck a lot better than I expected, but because our walls our texture we used small screws also. We almost had all of the room done and ran out we went to a store to pick up some just to finish the job and they were so much more expensive we just reordered from Amazon and waited a day. Definitely a good price. Our room looks so much neater. I primed and painted them to match our walls!
Sturdy kit. The double sided tape holds tight. And it’s so straightforward to put in. Didn’t even need the instructions. I cut the pieces to size with a razor.Snugly holds four 12AWG speaker cables and the snap-on/slide on covers let me stuff the cables in and close it up. Looks like floor trim. Great in my theater.Mine didn’t come with any straight couplers. Was gonna return it, but I just ended up sticking the straight pieces to my wall as close as possible and they still look clean. Minus a star for that.Great kit nonetheless. Will be buying another set as I already used up 26 feet and I need 26 more lol!
I recently purchased the 630in Cord Hider Kit, and I couldn’t be happier with the results! This kit is a game-changer for anyone looking to organize and conceal wires in a clean, professional manner. The 40-piece set, each measuring 15.7in x 0.96in x 0.57in, provides plenty of coverage, making it perfect for managing TV cables, home office wires, or entertainment setups.The installation was straightforward and stress-free. The adhesive backing sticks firmly to walls without damaging the paint, and the paintable surface allows the raceways to blend seamlessly with any décor. I especially appreciate that it keeps cords completely hidden, creating a sleek, clutter-free look.The quality of the material is excellent—sturdy yet flexible enough to navigate corners and edges. The white finish looks clean and modern, and after painting, it virtually disappears against the wall.Overall, this cord hider kit exceeded my expectations. It’s practical, versatile, and delivers a professional finish. Highly recommend for anyone tired of messy cables and looking for an easy way to keep their space organized!
This cord hider kit is perfect for keeping wires organized and out of sight. The 116-inch length provides ample coverage, and the paintable surface allows it to blend seamlessly with walls for a clean, professional look.Installation is straightforward, with pieces that snap together easily and hold securely. It’s durable and keeps cords protected from damage while reducing clutter.Overall, a high-quality, practical, and aesthetically pleasing solution for cable management. Highly recommended for home or office use.
Strong plastic material. Sticky tape side will not hold, must screw in. Very cutable for sizing. Worked well for hiding wires. Painted to mach house color. B +.
Cumple con lo que dice, cubre los cables, pero el tamaño de las piezas es muy corto, poco más de 30cm por lo que tienes que estar poniendo las uniones muy seguido además de que son muy difíciles de manipular una vez que están puestas y si quieres mover algo tienes que sacar desde el inicio del trayecto ya que de no ser así se rompen al intentar sacarlas puesto que es un plástico de mala calidad sinceramente, saca del apuro, pero mejor comprar en tiendas locales como The Home Depot tramos largos y de mejor calidad.
This cord hider kit is okay. It does what it's supposed to do by hiding ugly TV and entertainment center wires, which is the main reason I bought it.The pros are that it's easy to cut to size with a utility knife and the adhesive sticks well to clean, painted walls. The white color is inoffensive.However, there are a few cons:· Noticeable Profile: The dimensions (almost 1 inch wide and over half an inch tall) make it more prominent on the wall than I expected. It doesn't blend in seamlessly; it looks like a long, white box running down your wall.· Difficult to Paint: The plastic material feels cheap and doesn't take paint well. I had to use a primer and several coats to get it to match my wall color, and even then, it doesn't look perfect.· Assembly Can Be Tricky: Getting all the wires to stay inside the channel while you snap the cover on is fiddly. If you have several thick cables, it can be a tight fit and the cover doesn't always want to snap shut cleanly.Bottom Line: This is a functional, basic solution if you just want to tidy up cords quickly and don't mind the look of a plastic raceway. But if you're looking for a low-profile, discreet hider that will truly blend into your wall, this might not be the best choice. It works, but it's not elegant.
Perfect for covering wires. I used this to hide wires on the outside of my house. It worked perfectly. Easy to install and cut. I used a pair of tin snips to make the cuts.
Effortlessly routed 4 speaker wires around the room. I could perhaps fit 6 if I had to. They are not refrigerator-white like some other ones I have which makes it more appealing next to various shades of off-white.The covers can be slid on or pushed on which makes it easy to work with. I wish it included a few horizontal T-fittings but the inside-elbow was good enough for making T-junctions.I didn’t use the sticky back as I felt they would damage the paint but laying them on the floor, by the walls, and under pressure from the wires, it will not budge.I will surely order it again.
These worked great. They stuck a lot better than I expected, but because our walls our texture we used small screws also. We almost had all of the room done and ran out we went to a store to pick up some just to finish the job and they were so much more expensive we just reordered from Amazon and waited a day. Definitely a good price. Our room looks so much neater. I primed and painted them to match our walls!
Sturdy kit. The double sided tape holds tight. And it’s so straightforward to put in. Didn’t even need the instructions. I cut the pieces to size with a razor.Snugly holds four 12AWG speaker cables and the snap-on/slide on covers let me stuff the cables in and close it up. Looks like floor trim. Great in my theater.Mine didn’t come with any straight couplers. Was gonna return it, but I just ended up sticking the straight pieces to my wall as close as possible and they still look clean. Minus a star for that.Great kit nonetheless. Will be buying another set as I already used up 26 feet and I need 26 more lol!
I recently purchased the 630in Cord Hider Kit, and I couldn’t be happier with the results! This kit is a game-changer for anyone looking to organize and conceal wires in a clean, professional manner. The 40-piece set, each measuring 15.7in x 0.96in x 0.57in, provides plenty of coverage, making it perfect for managing TV cables, home office wires, or entertainment setups.The installation was straightforward and stress-free. The adhesive backing sticks firmly to walls without damaging the paint, and the paintable surface allows the raceways to blend seamlessly with any décor. I especially appreciate that it keeps cords completely hidden, creating a sleek, clutter-free look.The quality of the material is excellent—sturdy yet flexible enough to navigate corners and edges. The white finish looks clean and modern, and after painting, it virtually disappears against the wall.Overall, this cord hider kit exceeded my expectations. It’s practical, versatile, and delivers a professional finish. Highly recommend for anyone tired of messy cables and looking for an easy way to keep their space organized!
This cord hider kit is perfect for keeping wires organized and out of sight. The 116-inch length provides ample coverage, and the paintable surface allows it to blend seamlessly with walls for a clean, professional look.Installation is straightforward, with pieces that snap together easily and hold securely. It’s durable and keeps cords protected from damage while reducing clutter.Overall, a high-quality, practical, and aesthetically pleasing solution for cable management. Highly recommended for home or office use.
Strong plastic material. Sticky tape side will not hold, must screw in. Very cutable for sizing. Worked well for hiding wires. Painted to mach house color. B +.
Cumple con lo que dice, cubre los cables, pero el tamaño de las piezas es muy corto, poco más de 30cm por lo que tienes que estar poniendo las uniones muy seguido además de que son muy difíciles de manipular una vez que están puestas y si quieres mover algo tienes que sacar desde el inicio del trayecto ya que de no ser así se rompen al intentar sacarlas puesto que es un plástico de mala calidad sinceramente, saca del apuro, pero mejor comprar en tiendas locales como The Home Depot tramos largos y de mejor calidad.
YesBes cord covers for wires on wall
Wire covers not only help with home decor and overall appearance but are also a great protector for you and your family.
Previous page
Next page